Boot log du kernel 315 de qooq¶
Attention c'est le boot log sur la partition abuledu 12.08 donc les "erreurs" à la fin sont liées à ce mélange
[ 0.000000] Linux version 3.1.5 (owner@owner-virtual-machine) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #54 SMP PREEMPT Tue Jul 3 17:07:10 CEST 2012 [ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Jarod board [ 0.000000] Reserving 25165824 bytes SDRAM for VRAM [ 0.000000] CMA: reserved 32 MiB at 92000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.3 [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000 [ 0.000000] On node 0 totalpages: 115456 [ 0.000000] free_area_init_node: node 0, pgdat c0768d40, node_mem_map c0b76000 [ 0.000000] DMA zone: 952 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 114504 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @d4003000 s7840 r8192 d12640 u32768 [ 0.000000] pcpu-alloc: s7840 r8192 d12640 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 114504 [ 0.000000] Kernel command line: console=tty0 mem=476M@0x80000000 rootwait nocompcache vram=24M omapfb.vram=0:12M root=/dev/mmcblk1p2 rootfstype=ext4 fixrtc smsc95xx.macaddr=2C:00:2C:00:00:46 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 451MB = 451MB total [ 0.000000] Memory: 412924k/412924k available, 74500k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xde000000 - 0xf8000000 ( 416 MB) [ 0.000000] lowmem : 0xc0000000 - 0xddc00000 ( 476 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc06d7000 (6972 kB) [ 0.000000] .init : 0xc06d7000 - 0xc070fea0 ( 228 kB) [ 0.000000] .data : 0xc0710000 - 0xc0769b80 ( 359 kB) [ 0.000000] .bss : 0xc0769ba4 - 0xc0b75fd0 (4146 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3679 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.001739] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.070343] pid_max: default: 32768 minimum: 301 [ 0.070709] Security Framework initialized [ 0.070892] Mount-cache hash table entries: 512 [ 0.072296] CPU: Testing write buffer coherency: ok [ 0.072814] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.072845] Calibrating local timer... 491.69MHz. [ 0.117431] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.117523] L310 cache controller enabled [ 0.117553] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B [ 0.193969] CPU1: Booted secondary processor [ 0.194000] CPU1: Unknown IPI message 0x1 [ 0.262237] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.262298] Brought up 2 CPUs [ 0.262359] SMP: Total of 2 processors activated (3972.37 BogoMIPS). [ 0.263214] devtmpfs: initialized [ 0.268371] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck. [ 0.320648] omap_hwmod: mcpdm: _wait_target_ready: -16 [ 0.320678] ------------[ cut here ]------------ [ 0.320709] WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1509 _enable+0x1e4/0x294() [ 0.320739] Modules linked in: [ 0.320739] Backtrace: [ 0.320770] [<c001161c>] (dump_backtrace+0x0/0x10c) from [<c0502a4c>] (dump_stack+0x18/0x1c) [ 0.320831] r6:000005e5 r5:c001f934 r4:00000000 r3:00000000 [ 0.320861] [<c0502a34>] (dump_stack+0x0/0x1c) from [<c0045b30>] (warn_slowpath_common+0x54/0x6c) [ 0.320892] [<c0045adc>] (warn_slowpath_common+0x0/0x6c) from [<c0045b6c>] (warn_slowpath_null+0x24/0x2c) [ 0.320922] r8:00000000 r7:00000000 r6:00000000 r5:fffffff0 r4:c0737b18 [ 0.320953] r3:00000009 [ 0.320983] [<c0045b48>] (warn_slowpath_null+0x0/0x2c) from [<c001f934>] (_enable+0x1e4/0x294) [ 0.321014] [<c001f750>] (_enable+0x0/0x294) from [<c001fe18>] (_setup+0xa8/0x178) [ 0.321044] r6:c001fd70 r5:00000002 r4:c0737b18 [ 0.321075] [<c001fd70>] (_setup+0x0/0x178) from [<c00200c0>] (omap_hwmod_for_each+0x3c/0x64) [ 0.321105] r5:c072cd54 r4:c0737b18 [ 0.321136] [<c0020084>] (omap_hwmod_for_each+0x0/0x64) from [<c06e10b4>] (omap_hwmod_setup_all+0x74/0xa0) [ 0.321166] r7:00000013 r6:00000000 r5:db03a000 r4:c0769bc0 [ 0.321228] [<c06e1040>] (omap_hwmod_setup_all+0x0/0xa0) from [<c0008644>] (do_one_initcall+0x40/0x184) [ 0.321258] [<c0008604>] (do_one_initcall+0x0/0x184) from [<c06d7930>] (kernel_init+0x94/0x134) [ 0.321289] [<c06d789c>] (kernel_init+0x0/0x134) from [<c0049440>] (do_exit+0x0/0x6dc) [ 0.321319] r5:c06d789c r4:00000000 [ 0.321411] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.321411] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.327911] Enabling ERRATA 742230 [ 0.327941] Enabling ERRATA 751472 [ 0.327972] OMAP4: Map 0x9c100000 to 0xfe600000 for dram barrier [ 0.329315] print_constraints: dummy: [ 0.331085] NET: Registered protocol family 16 [ 0.351196] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.351562] GPMC revision 6.0 [ 0.355560] omap_device: omap_gpio.0: new worst case activate latency 0: 30517 [ 0.355987] OMAP GPIO hardware version 0.1 [ 0.359069] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.359954] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.361022] SMSC hub down [ 0.362152] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.362762] omap_device: omap_uart.2: new worst case deactivate latency 0: 30517 [ 0.365997] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.366027] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.372100] omap_ipussdev_init: could not look up fdif [ 0.373596] OMAP DMA hardware revision 0.0 [ 0.396820] bio: create slab <bio-0> at 0 [ 0.398437] i2c-core: driver [twl] using legacy suspend method [ 0.398468] i2c-core: driver [twl] using legacy resume method [ 0.399230] SCSI subsystem initialized [ 0.400512] usbcore: registered new interface driver usbfs [ 0.400695] usbcore: registered new interface driver hub [ 0.400939] usbcore: registered new device driver usb [ 0.402526] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.415222] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz [ 0.416564] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.417175] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.418395] print_constraints: VUSB: 3300 mV normal standby [ 0.617004] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.618164] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.618896] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.619445] print_constraints: VCXIO: 1800 mV normal standby [ 0.620208] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.628112] omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz [ 0.643341] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz [ 0.645202] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.646850] cfg80211: Calling CRDA to update world regulatory domain [ 0.647491] Switching to clocksource 32k_counter [ 0.650939] Switched to NOHz mode on CPU #0 [ 0.651336] Switched to NOHz mode on CPU #1 [ 0.669036] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.669250] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517 [ 0.669372] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.669403] musb-hdrc: MHDRC RTL version 2.0 [ 0.669403] musb-hdrc: setup fifo_mode 4 [ 0.669403] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.669494] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 0.669586] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1 [ 0.670684] hub 1-0:1.0: USB hub found [ 0.670745] hub 1-0:1.0: 1 port detected [ 0.724029] musb-hdrc musb-hdrc: USB Host mode controller at fc0ab000 using DMA, IRQ 124 [ 0.724609] NET: Registered protocol family 2 [ 0.724884] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.725463] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.725799] TCP bind hash table entries: 16384 (order: 7, 655360 bytes) [ 0.728240] TCP: Hash tables configured (established 16384 bind 16384) [ 0.728332] TCP reno registered [ 0.728363] UDP hash table entries: 256 (order: 2, 24576 bytes) [ 0.728485] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes) [ 0.728973] NET: Registered protocol family 1 [ 0.729492] RPC: Registered named UNIX socket transport module. [ 0.729522] RPC: Registered udp transport module. [ 0.729553] RPC: Registered tcp transport module. [ 0.729553] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.860809] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init [ 0.860870] ipu-power initialized ipu, major: 253, minor: 0 [ 0.861389] omap-iommu omap-iommu.0: ducati registered [ 0.861480] omap-iommu omap-iommu.1: tesla registered [ 0.862274] iovmm-omap initialized ducati, major: 252, base-minor: 0 [ 0.862609] iovmm-omap initialized tesla, major: 252, base-minor: 1 [ 0.863067] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla [ 0.863433] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 251, base-minor: 0 [ 0.863494] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0 [ 0.863800] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 251, base-minor: 1 [ 0.863861] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1 [ 0.864166] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 251, base-minor: 2 [ 0.865447] audit: initializing netlink socket (disabled) [ 0.865570] type=2000 audit(0.867:1): initialized [ 0.956573] msgmni has been set to 870 [ 0.957977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.958038] io scheduler noop registered [ 0.958068] io scheduler deadline registered [ 0.958160] io scheduler cfq registered (default) [ 0.959381] omap_device: omapdss_dss.-1: new worst case activate latency 0: 30517 [ 0.959442] OMAP DSS rev 4.0 [ 0.962005] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 2563476 [ 0.981109] omap_device: omapdss_dispc.-1: new worst case deactivate latency 0: 2716064 [ 0.983978] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.327636] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 1.452301] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 1.577758] [drm] Initialized drm 1.1.0 20060810 [ 1.589447] brd: module loaded [ 1.596008] loop: module loaded [ 1.611755] Timer failed to reset [ 1.619018] usbcore: registered new interface driver cdc_ether [ 1.619232] usbcore: registered new interface driver smsc95xx [ 1.619415] usbcore: registered new interface driver plusb [ 1.619476] Initializing USB Mass Storage driver... [ 1.619689] usbcore: registered new interface driver usb-storage [ 1.619720] USB Mass Storage support registered. [ 1.620452] mousedev: PS/2 mouse device common for all mice [ 1.621154] input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input0 [ 1.621246] omap_device: omap4-keypad.-1: new worst case activate latency 0: 30517 [ 1.622528] twl6030_pwrbutton_probe: Enter [ 1.623046] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input1 [ 1.627258] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 1.627563] i2c /dev entries driver [ 1.628723] Linux media interface: v0.10 [ 1.628906] Linux video capture interface: v2.00 [ 1.647521] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 4145 mV [ 1.651000] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 1.651702] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 1.651763] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517 [ 1.652801] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 1.652923] cpuidle: using governor ladder [ 1.652954] cpuidle: using governor menu [ 1.654022] _regulator_get: omap_hsmmc.1 supply vmmc not found, using dummy regulator [ 1.654144] _regulator_get: omap_hsmmc.1 supply vmmc_aux not found, using dummy regulator [ 1.654632] omap_device: omap_hsmmc.1: new worst case deactivate latency 0: 30517 [ 1.654754] omap_hsmmc omap_hsmmc.1: could not set regulator OCR (-22) [ 1.656280] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 1.658264] Registered led device: pandaboard::status1 [ 1.658538] Registered led device: pandaboard::status2 [ 1.659606] usbcore: registered new interface driver usbhid [ 1.659637] usbhid: USB HID core driver [ 1.659667] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 1.659729] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=db3c1de0, cooling= (null) [ 1.661529] proc4430_drv_initializeModule [ 1.662689] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla [ 1.663085] omap-devh initialized Tesla, major: 241, base-minor: 0 [ 1.664001] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3 [ 1.664337] omap-devh initialized SysM3, major: 241, base-minor: 1 [ 1.664672] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3 [ 1.665008] omap-devh initialized AppM3, major: 241, base-minor: 2 [ 1.666900] dac3101_module_init [ 1.704498] tlv320dac3101 3-0018: dapm: unknown pin Headset Stereophone [ 1.705505] Headset NOT plugged [ 1.706390] asoc: tlv320dac3101-hifi <-> omap-mcbsp-dai.3 mapping ok [ 1.707550] input: OMAP4 Panda Headset Jack as /devices/platform/soc-audio/sound/card0/input2 [ 1.708282] ALSA device list: [ 1.708312] #0: TI OMAP4 Panda Board [ 1.708953] oprofile: using arm/armv7-ca9 [ 1.709350] TCP cubic registered [ 1.709533] NET: Registered protocol family 10 [ 1.710540] IPv6 over IPv4 tunneling driver [ 1.711547] NET: Registered protocol family 17 [ 1.711608] NET: Registered protocol family 15 [ 1.711730] lib80211: common routines for IEEE802.11 drivers [ 1.711791] lib80211_crypt: registered algorithm 'NULL' [ 1.711791] Registering the dns_resolver key type [ 1.712005] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 1.712066] ThumbEE CPU extension supported. [ 1.712127] Registering SWP/SWPB emulation handler [ 1.716003] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 1.716033] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage [ 1.716033] [ 1.717376] thermal_cooling_dev_register:Found cpu cpu [ 1.717437] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=db3c1de0, cooling=c072d17c [ 1.717864] Power Management for TI OMAP4. [ 1.718811] sr_init: No PMIC hook to init smartreflex [ 1.718811] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 1.719268] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 1.719268] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 1.719879] SmartReflex Class3 initialized [ 1.719940] omap_device: smartreflex.2: new worst case activate latency 0: 61035 [ 1.719970] sr_class3_enable: Curr voltage unknown. Cannot enable sr_iva [ 1.720031] SMSC hub up [ 1.733886] regulator_init_complete: VCXIO: incomplete constraints, leaving on [ 1.735992] twl_rtc twl_rtc: setting system clock to 2012-09-01 16:38:09 UTC (1346517489) [ 1.744018] fck = 118153846 (13) [ 1.744049] omapdss DPI: Could not find exact pixel clock. Requested 23500 kHz, got 23630 kHz [ 1.772338] fck = 90352941 (17) [ 1.772735] mmc0: new high speed MMC card at address 0001 [ 1.773529] mmcblk0: mmc0:0001 SEM08G 7.39 GiB [ 1.773864] mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB [ 1.774108] mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB [ 1.779907] mmcblk0: p1 p2 p3 < p5 p6 > p4 [ 1.780242] Console: switching to colour frame buffer device 128x37 [ 1.784637] mmcblk0boot1: unknown partition table [ 1.786132] mmcblk0boot0: unknown partition table [ 1.786712] omap_device: omap_hsmmc.0: new worst case activate latency 0: 30517 [ 1.798919] fb0: omapdrm frame buffer device [ 1.802185] drm: registered panic notifier [ 1.805450] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.808746] [drm] No driver support for vblank timestamp query. [ 1.812103] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0 [ 1.816558] Waiting for root device /dev/mmcblk1p2... [ 1.944885] mmc1: host does not support reading read-only switch. assuming write-enable. [ 1.950500] mmc1: new high speed SDHC card at address 57c4 [ 1.954650] mmcblk1: mmc1:57c4 SD04G 3.75 GiB [ 1.959381] mmcblk1: p1 p2 p3 [ 2.124176] usb 1-1: new high speed USB device number 2 using musb-hdrc [ 2.177581] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.180999] VFS: Mounted root (ext4 filesystem) on device 179:26. [ 2.186492] devtmpfs: mounted [ 2.189941] Freeing init memory: 224K [ 2.276611] hub 1-1:1.0: USB hub found [ 2.279846] hub 1-1:1.0: 5 ports detected [ 2.420562] init: Failed to create pty - disabling logging for job [ 2.423889] init: Temporary process spawn error: No such file or directory [ 2.449645] init: Failed to create pty - disabling logging for job [ 2.452941] init: Temporary process spawn error: No such file or directory [ 2.464111] init: Failed to create pty - disabling logging for job [ 2.467315] init: Temporary process spawn error: No such file or directory [ 2.472808] init: Failed to create pty - disabling logging for job [ 2.476043] init: Temporary process spawn error: No such file or directory [ 2.536529] init: ureadahead main process (698) terminated with status 5 [ 2.569580] usb 1-1.1: new high speed USB device number 3 using musb-hdrc [ 2.682495] smsc95xx v1.0.4 [ 2.752380] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-musb-hdrc-1.1, smsc95xx USB 2.0 Ethernet, 2c:00:2c:00:00:46 [ 2.819610] init: Failed to create pty - disabling logging for job [ 2.823089] init: Temporary process spawn error: No such file or directory [ 2.835235] usb 1-1.2: new low speed USB device number 4 using musb-hdrc [ 2.845825] init: Failed to create pty - disabling logging for job [ 2.849365] init: Temporary process spawn error: No such file or directory [ 2.888702] init: Failed to create pty - disabling logging for job [ 2.892425] init: Temporary process spawn error: No such file or directory [ 2.919677] init: Failed to create pty - disabling logging for job [ 2.923370] init: Temporary process spawn error: No such file or directory