Qooq 20¶
Caractéristiques¶
- Processeur omap4 Texas Instrument : Cortex A9 double coeur cadencé à 1Ghz
- GPU3D : PowerVR SGX 450
- GPU2D : Processeur vidéo permettant le décodage hardware en 1080p
- Mémoire 512 Mo
- Stockage interne 8 Go
- Écran 10’1 (WSVGA, 1024x600)
- Dalle tactile capacitive multitouch
- Batterie 5000 mAh
- HP stéréo
- 4 bouton physique
- Wifi B/G/N
- port USB (plein taille)
- Lecteur SD
- Connecteur Ethernet
- Prise Casque
Informations diverses¶
- cmdline (boot)
console=tty0 mem=476M@0x80000000 rootwait quiet splash vram=24M omapfb.vram=0:12M root=/dev/mmcblk1p2 rootfstype=ext4 fixrtc smsc95xx.macaddr=2C:00:2C:00:00:46
- interrupts
CPU0 CPU1
39: 8 0 GIC TWL6030-PIH
41: 0 0 GIC l3-dbg-irq
42: 0 0 GIC l3-app-irq
43: 0 0 GIC prcm
44: 10477 0 GIC DMA
52: 0 0 GIC gpmc
53: 4 0 GIC SGX ISR
57: 10 0 GIC OMAP DISPC
60: 0 0 GIC omap-iommu.1
69: 2930 0 GIC gp timer
85: 0 0 GIC omapdss_dsi.0
88: 1765 0 GIC omap_i2c
89: 0 0 GIC omap_i2c
93: 120 0 GIC omap_i2c
104: 0 0 GIC serial idle
106: 0 0 GIC serial idle
115: 9853 0 GIC mmc1
116: 0 0 GIC omapdss_dsi.1
118: 1995 0 GIC mmc0
124: 2044 0 GIC musb-hdrc
125: 745 0 GIC musb-hdrc
132: 0 0 GIC omap-iommu.0
152: 0 0 GIC omap4-keypad
252: 0 0 GPIO hsdet-gpio
368: 0 0 twl6030 twl6030_pwrbutton
369: 0 0 twl6030 twl6030_gpadc
370: 1 0 twl6030 twl_bci_ctrl
371: 0 0 twl6030 twl6030_gpadc
372: 1 0 twl6030 twl6030_usb
373: 1 0 twl6030 twl_bci_fault
378: 1 0 twl6030 twl6030_usb
379: 0 0 twl6030 rtc0
384: 1 0 twl6030 mmc1
IPI0: 0 0 Timer broadcast interrupts
IPI1: 15035 16121 Rescheduling interrupts
IPI2: 0 0 Function call interrupts
IPI3: 91 84 Single function call interrupts
IPI4: 0 0 CPU stop interrupts
LOC: 6447 5767 Local timer interrupts
- iomem
40122000-401220ff : mpu
40124000-401240ff : mpu
40126000-401260ff : mpu
4012e000-4012e07f : omap-dmic-dai
40132000-4013207f : omap-mcpdm
40132000-4013207f : McPDM
40180000-4018ffff : dmem
401a0000-401a1fff : cmem
401c0000-401c5fff : smem
401e0000-401e1fff : pmem
401f1000-401f13ff : mpu
44000000-44000fff : l3_main_1.0
44000000-44000fff : omap_l3_noc.0
44800000-44801fff : omap_l3_noc.0
45000000-45000fff : omap_l3_noc.0
48020000-480200ff : omap_uart.2
48020000-480200ff : omap_uart
48040000-4804007f : omapdss_dss
48041000-48041fff : omapdss_dispc
48042000-480420ff : omapdss_rfbi
48043000-480430ff : omapdss_venc
48044000-480441ff : omapdss_dsi.0
48045000-480451ff : omapdss_dsi.1
48046000-48046fff : omapdss_hdmi
48055000-480551ff : omap_gpio.1
48057000-480571ff : omap_gpio.2
48059000-480591ff : omap_gpio.3
4805b000-4805b1ff : omap_gpio.4
4805d000-4805d1ff : omap_gpio.5
48060000-480600ff : omap_i2c.3
48060000-480600ff : omap_i2c
4806a000-4806a0ff : omap4plus_scm.0
4806a000-4806a0ff : omap_uart.0
4806a000-4806a0ff : omap_uart
48070000-480700ff : omap_i2c.1
48070000-480700ff : omap_i2c
48072000-480720ff : omap_i2c.2
48072000-480720ff : omap_i2c
48096000-480960ff : omap-mcbsp.4
4809c100-4809c4ff : omap_hsmmc.0
4809c100-4809c4ff : omap_hsmmc
480b4100-480b44ff : omap_hsmmc.1
480b4100-480b44ff : omap_hsmmc
49022000-490220ff : dma
49024000-490240ff : dma
49026000-490260ff : dma
4902e000-4902e07f : omap-dmic-dai
49032000-4903207f : omap-mcpdm
49080000-4908ffff : dmem_dma
490a0000-490a1fff : cmem_dma
490c0000-490c5fff : smem_dma
490e0000-490e1fff : pmem_dma
490f1000-490f13ff : dma
4a002000-4a0027ff : omap4plus_scm.0
4a056000-4a056fff : omap_dma_system.0
4a0ab000-4a0ab003 : musb-omap2430
4a0ab000-4a0ab003 : musb-omap2430
4a0d9000-4a0d903f : smartreflex.2
4a0d9000-4a0d903f : smartreflex.2
4a0db000-4a0db03f : smartreflex.1
4a0db000-4a0db03f : smartreflex.1
4a0dd000-4a0dd03f : smartreflex.0
4a0dd000-4a0dd03f : smartreflex.0
4a0f4000-4a0f41ff : omap-mailbox
4a0f6000-4a0f6fff : hwspinlock.0
4a310000-4a3101ff : omap_gpio.0
4a314000-4a31407f : omap_wdt
4a314000-4a31407f : omap_wdt
4a31c000-4a31c07f : omap4-keypad
4a31c000-4a31c07f : omap4-keypad
52000000-520000ff : omap-ipu-pm.5
52000000-520000ff : omap-iommu.0
52001000-5200116f : omap-ipu-pm.5
52001000-5200116f : omap-iommu.0
52001170-5200118f : omap-ipu-pm.5
52001170-5200118f : omap-iommu.0
55082000-550820ff : omap-iommu.0
56000000-5600ffff : omapdrm_pvr.0
58000000-5800007f : omapdss_dss
58001000-58001fff : omapdss_dispc
58002000-580020ff : omapdss_rfbi
58003000-580030ff : omapdss_venc
58004000-580041ff : omapdss_dsi.0
58005000-580051ff : omapdss_dsi.1
58006000-58006fff : omapdss_hdmi
5a000000-5a07ffff : omap-ipu-pm.6
5a000000-5a07ffff : iva.0
80000000-9c2fffff : System RAM
80008000-806d6fff : Kernel text
80710000-80b75fcf : Kernel data
- xorg -> powervr
[ 13.328] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so [ 13.361] (II) pvr: Driver for PowerVR chipsets: PowerVR SGX [ 13.374] (WW) Falling back to old probe method for pvr [ 13.391] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so [ 13.399] PVR:(Error): PVRSRVOpenDCDevice: Error - 138 returned [95, /bridged_pvr_dc_glue.c] [ 13.432] (II) pvr(0): Creating default Display subsection in Screen section [ 13.432] (==) pvr(0): Depth 24, (==) framebuffer bpp 32 [ 13.432] (==) pvr(0): RGB weight 888 [ 13.432] (==) pvr(0): Default visual is TrueColor [ 13.432] (II) pvr(0): call drmModeGetResources [ 13.432] (II) pvr(0): -> 1 connectors, 3 encoders, 3 crtcs, 0 fbs [ 13.433] (II) pvr(0): Size range: 640x480 -> 2048x2048 [ 13.433] (II) pvr(0): Create CRTC: 0 [ 13.433] (II) pvr(0): Create CRTC: 1 [ 13.433] (II) pvr(0): Create CRTC: 2 [ 13.433] (II) pvr(0): Create Output: 0 [ 13.433] (II) pvr(0): Output pvr0 has no monitor section [ 13.433] (II) pvr(0): output: detect [ 13.434] (II) pvr(0): output: Get modes [ 13.434] (II) pvr(0): max dimensions: 2048x2048 [ 13.434] (II) pvr(0): Manufacturer: CMO Model: 1016 Serial#: 0 [ 13.434] (II) pvr(0): Year: 2009 Week: 51 [ 13.434] (II) pvr(0): EDID Version: 1.3 [ 13.434] (II) pvr(0): Digital Display Input [ 13.434] (II) pvr(0): Max Image Size [cm]: horiz.: 22 vert.: 12 [ 13.434] (II) pvr(0): Gamma: 2.20 [ 13.434] (II) pvr(0): No DPMS capabilities specified [ 13.434] (II) pvr(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.434] (II) pvr(0): First detailed timing is preferred mode [ 13.434] (II) pvr(0): redX: 0.570 redY: 0.363 greenX: 0.352 greenY: 0.560 [ 13.434] (II) pvr(0): blueX: 0.155 blueY: 0.125 whiteX: 0.313 whiteY: 0.329 [ 13.435] (II) pvr(0): Manufacturer's mask: 0 [ 13.435] (II) pvr(0): Supported detailed timing: [ 13.435] (II) pvr(0): clock: 44.0 MHz Image Size: 222 x 125 mm [ 13.435] (II) pvr(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1184 h_border: 0 [ 13.435] (II) pvr(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 619 v_border: 0 [ 13.435] (II) pvr(0): N101L6-L0B [ 13.435] (II) pvr(0): CMO [ 13.435] (II) pvr(0): N101L6-L0B [ 13.435] (II) pvr(0): EDID (in hex): [ 13.435] (II) pvr(0): 00ffffffffffff000daf161000000000 [ 13.435] (II) pvr(0): 3313010380160c780a01c5925d5a8f27 [ 13.435] (II) pvr(0): 20505400000001010101010101010101 [ 13.435] (II) pvr(0): 0101010101012d1100a0405813203020 [ 13.435] (II) pvr(0): 3a00de7d00000018000000fe004e3130 [ 13.435] (II) pvr(0): 314c362d4c30420a2020000000fe0043 [ 13.435] (II) pvr(0): 4d4f0a202020202020202020000000fe [ 13.435] (II) pvr(0): 004e3130314c362d4c30420a20200046 [ 13.435] (II) pvr(0): EDID for output pvr0 [ 13.435] (II) pvr(0): Manufacturer: CMO Model: 1016 Serial#: 0 [ 13.436] (II) pvr(0): Year: 2009 Week: 51 [ 13.436] (II) pvr(0): EDID Version: 1.3 [ 13.436] (II) pvr(0): Digital Display Input [ 13.436] (II) pvr(0): Max Image Size [cm]: horiz.: 22 vert.: 12 [ 13.436] (II) pvr(0): Gamma: 2.20 [ 13.436] (II) pvr(0): No DPMS capabilities specified [ 13.436] (II) pvr(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.436] (II) pvr(0): First detailed timing is preferred mode [ 13.436] (II) pvr(0): redX: 0.570 redY: 0.363 greenX: 0.352 greenY: 0.560 [ 13.436] (II) pvr(0): blueX: 0.155 blueY: 0.125 whiteX: 0.313 whiteY: 0.329 [ 13.436] (II) pvr(0): Manufacturer's mask: 0 [ 13.436] (II) pvr(0): Supported detailed timing: [ 13.436] (II) pvr(0): clock: 44.0 MHz Image Size: 222 x 125 mm [ 13.436] (II) pvr(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1184 h_border: 0 [ 13.436] (II) pvr(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 619 v_border: 0 [ 13.436] (II) pvr(0): N101L6-L0B [ 13.436] (II) pvr(0): CMO [ 13.436] (II) pvr(0): N101L6-L0B [ 13.436] (II) pvr(0): EDID (in hex): [ 13.436] (II) pvr(0): 00ffffffffffff000daf161000000000 [ 13.436] (II) pvr(0): 3313010380160c780a01c5925d5a8f27 [ 13.437] (II) pvr(0): 20505400000001010101010101010101 [ 13.437] (II) pvr(0): 0101010101012d1100a0405813203020 [ 13.437] (II) pvr(0): 3a00de7d00000018000000fe004e3130 [ 13.437] (II) pvr(0): 314c362d4c30420a2020000000fe0043 [ 13.437] (II) pvr(0): 4d4f0a202020202020202020000000fe [ 13.437] (II) pvr(0): 004e3130314c362d4c30420a20200046 [ 13.437] (II) pvr(0): EDID vendor "CMO", prod id 4118 [ 13.437] (II) pvr(0): Printing DDC gathered Modelines: [ 13.437] (II) pvr(0): Modeline "1024x600"x0.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.437] (II) pvr(0): EDID vendor "CMO", prod id 4118 [ 13.437] (II) pvr(0): Printing DDC gathered Modelines: [ 13.437] (II) pvr(0): Modeline "1024x600"x0.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.437] (II) pvr(0): copy mode 1024x600 (0xb7dfc880 0xb7dfcd60) [ 13.437] (II) pvr(0): copy mode 800x600 (0xb7dfcea0 0xb7dfce00) [ 13.437] (II) pvr(0): copy mode 720x480 (0xb7dfcf50 0xb7dfceb0) [ 13.437] (II) pvr(0): copy mode 640x480 (0xb7dfd000 0xb7dfcf60) [ 13.437] (II) pvr(0): output: Mode valid? [ 13.438] (II) pvr(0): Modeline "1024x600"x60.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.438] (II) pvr(0): output: Mode valid? [ 13.438] (II) pvr(0): Modeline "800x600"x59.8 35.50 800 848 880 960 600 603 607 618 +hsync -vsync (37.0 kHz) [ 13.438] (II) pvr(0): output: Mode valid? [ 13.438] (II) pvr(0): Modeline "720x480"x59.2 26.00 720 768 800 880 480 483 493 499 +hsync -vsync (29.5 kHz) [ 13.438] (II) pvr(0): output: Mode valid? [ 13.438] (II) pvr(0): Modeline "640x480"x59.5 23.50 640 688 720 800 480 483 487 494 +hsync -vsync (29.4 kHz) [ 13.438] (II) pvr(0): Printing probed modes for output pvr0 [ 13.438] (II) pvr(0): Modeline "1024x600"x60.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.438] (II) pvr(0): Modeline "800x600"x59.8 35.50 800 848 880 960 600 603 607 618 +hsync -vsync (37.0 kHz) [ 13.438] (II) pvr(0): Modeline "720x480"x59.2 26.00 720 768 800 880 480 483 493 499 +hsync -vsync (29.5 kHz) [ 13.438] (II) pvr(0): Modeline "640x480"x59.5 23.50 640 688 720 800 480 483 487 494 +hsync -vsync (29.4 kHz) [ 13.438] (II) pvr(0): Output pvr0 connected [ 13.438] (II) pvr(0): Using exact sizes for initial modes [ 13.438] (II) pvr(0): Output pvr0 using initial mode 1024x600 [ 13.438] (II) pvr(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 13.438] (--) pvr(0): Virtual size is 1024x600 (pitch 1024) [ 13.439] (**) pvr(0): Driver mode "1024x600": 44.0 MHz (scaled from 0.0 MHz), 37.1 kHz, 60.0 Hz [ 13.439] (II) pvr(0): Modeline "1024x600"x60.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.439] (**) pvr(0): Driver mode "800x600": 35.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 59.8 Hz [ 13.439] (II) pvr(0): Modeline "800x600"x59.8 35.50 800 848 880 960 600 603 607 618 +hsync -vsync (37.0 kHz) [ 13.439] (**) pvr(0): Driver mode "720x480": 26.0 MHz (scaled from 0.0 MHz), 29.5 kHz, 59.2 Hz [ 13.439] (II) pvr(0): Modeline "720x480"x59.2 26.00 720 768 800 880 480 483 493 499 +hsync -vsync (29.5 kHz) [ 13.439] (**) pvr(0): Driver mode "640x480": 23.5 MHz (scaled from 0.0 MHz), 29.4 kHz, 59.5 Hz [ 13.439] (II) pvr(0): Modeline "640x480"x59.5 23.50 640 688 720 800 480 483 487 494 +hsync -vsync (29.4 kHz) [ 13.439] (**) pvr(0): Display dimensions: (220, 120) mm [ 13.439] (**) pvr(0): DPI set to (118, 127) [ 13.448] (II) pvr(0): [pvr] Software copy threshold : 0B [ 13.448] (II) pvr(0): [pvr] Software solid threshold : 65536B [ 13.448] (II) pvr(0): [pvr] Software composite threshold : 65536B [ 13.448] (II) pvr(0): [pvr] Pixmap pool size: 134217728 Bytes [ 13.455] (II) pvr(0): [pvr] buffer type: cache [ 13.479] (II) pvr(0): [DRI2] Setup complete [ 13.479] (II) pvr(0): [DRI2] DRI driver: pvr [ 13.480] (II) pvr(0): [PVR] Pixmap Pool Init size: 134217728, max buff size 2457600 [ 13.480] (II) pvr(0): [PVR] Pixmap Pool Init: Total Pool 134217728, Max 4194304 / Min 4096 buff. Size, performed for 122 uSec [ 13.541] (==) pvr(0): Backing store disabled [ 13.541] (==) pvr(0): Silken mouse enabled [ 13.541] (==) pvr(0): DPMS enabled [ 13.541] (II) pvr(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 13.542] (II) pvr(0): output: Create resources [ 13.542] (==) pvr(0): Direct rendering enabled [ 13.542] (II) pvr(0): Using SW Cursor [ 13.542] (II) pvr(0): crtc: Set mode: 0x0 (1) [ 13.542] (II) pvr(0): Modeline "1024x600"x60.0 43.97 1024 1072 1104 1184 600 603 613 619 -hsync -vsync (37.1 kHz) [ 13.569] (II) pvr(0): crtc: Set dpms: 3 [ 13.570] (II) pvr(0): crtc: Set dpms: 3 [ 13.570] (II) pvr(0): Setting up hotplug handler [ 13.626] (EE) AIGLX error: dlopen of /usr/lib/arm-linux-gnueabihf/dri/pvr_dri.so failed (/usr/lib/arm-linux-gnueabihf/dri/pvr_dri.so: cannot open shared object file: No such file or directory) [ 13.697] (II) pvr(0): [PVR] Pixmap Pool Init size: 134217728, max buff size 2457600 [ 13.697] (II) pvr(0): [PVR] Pool Purge: Total Memory Used 0, Pool Memory used 0 [ 13.697] (II) pvr(0): [PVR] Pixmap Pool DeInit for 61 uSec [ 13.697] (II) pvr(0): [PVR] Pixmap Pool Init: Total Pool 134217728, Max 4194304 / Min 4096 buff. Size, performed for 183 uSec [ 13.697] (II) pvr(0): Setting screen physical size to 270 x 158 [ 13.697] (II) pvr(0): Resize! 1024x600 [ 13.725] (II) pvr(0): new dimensions: 1024x600 (4096) [ 13.725] (II) pvr(0): [PVR] Pixmap Pool Init size: 134217728, max buff size 2457600 [ 13.725] (II) pvr(0): [PVR] Pool Purge: Total Memory Used 0, Pool Memory used 0 [ 13.725] (II) pvr(0): [PVR] Pixmap Pool DeInit for 30 uSec [ 13.725] (II) pvr(0): [PVR] Pixmap Pool Init: Total Pool 134217728, Max 4194304 / Min 4096 buff. Size, performed for 152 uSec
- xorg -> dalle multitouch
[ 13.975] (II) config/udev: Adding input device ILITEK ILITEK Multi-Touch (/dev/input/event3) [ 13.975] (**) ILITEK ILITEK Multi-Touch: Applying InputClass "evdev touchscreen catchall" [ 13.975] (II) Using input driver 'evdev' for 'ILITEK ILITEK Multi-Touch' [ 13.975] (**) ILITEK ILITEK Multi-Touch: always reports core events [ 13.975] (**) evdev: ILITEK ILITEK Multi-Touch: Device: "/dev/input/event3" [ 13.975] (--) evdev: ILITEK ILITEK Multi-Touch: Vendor 0x222a Product 0x1 [ 13.976] (--) evdev: ILITEK ILITEK Multi-Touch: Found absolute axes [ 13.976] (--) evdev: ILITEK ILITEK Multi-Touch: Found absolute multitouch axes [ 13.976] (--) evdev: ILITEK ILITEK Multi-Touch: Found x and y absolute axes [ 13.976] (--) evdev: ILITEK ILITEK Multi-Touch: Found absolute touchscreen [ 13.976] (II) evdev: ILITEK ILITEK Multi-Touch: Configuring as touchscreen [ 13.976] (**) evdev: ILITEK ILITEK Multi-Touch: YAxisMapping: buttons 4 and 5 [ 13.976] (**) evdev: ILITEK ILITEK Multi-Touch: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 13.976] (II) XINPUT: Adding extended input device "ILITEK ILITEK Multi-Touch" (type: TOUCHSCREEN, id 8) [ 13.976] (II) evdev: ILITEK ILITEK Multi-Touch: initialized for absolute axes. [ 13.977] (**) ILITEK ILITEK Multi-Touch: (accel) keeping acceleration scheme 1 [ 13.977] (**) ILITEK ILITEK Multi-Touch: (accel) acceleration profile 0 [ 13.977] (**) ILITEK ILITEK Multi-Touch: (accel) acceleration factor: 2.000 [ 13.977] (**) ILITEK ILITEK Multi-Touch: (accel) acceleration threshold: 4 [ 13.979] (II) config/udev: Adding input device ILITEK ILITEK Multi-Touch (/dev/input/mouse0)
Astuces de QooQ¶
- Logo qooq 3 sec ça veut dire : mlo ok, Uboot ok, donc ta carte est bien revenue
- Boot NFS: Pour restaurer facilement tout j ai un System sur nfs (envNFS). Si tu boot avec le bouton du bas appuyé ça lance ce type de boot
Serveur NFS donc¶
Lecture du fichier uEnvNFS.txt
nfsroot=${serverip}:${nfsvolume}
nfsroot=192.168.2.201:/jarod2/nfs/minimal
mmcrootfstype=nfsroot fixrtc
optargs=noinitrd text splash ip=dhcp rootwait earlyprint nocompcache
mmc_load_uimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage
mmcargs=setenv bootargs console=${console} mem=${mem} ${optargs} vram=${vram} omapfb.vram=${fbvram} nfsroot=${nfsroot} rootfstype=${mmcrootfstype} ${mac_init}
uenvcmd=run mmc_load_uimage; echo ${bootmessage}; run mmcargs; bootm ${address_uimage}